.png)
ASM WALL-MOUNTED EXHAUST FANS
The ASM series includes 3 wall-mounted axial exhaust fan models, with air delivery rate of 90 to 300 m h, meeting most air change requirements involving direct duct exhausting and ventilation outdoors at air temperatures no higher than 40°C.
These fans have been specifically designed for use in straight ducts or in general for low-resistance ducts.
The electrical connection may be either on the outer surface (left or right) or recessed.
All models are in double electrical insulation and IP 44 for water spray protection except for the IG and PIR versions which offer protection IP 43 against vertical rain.
Therefore they are particularly recommended for installation in bathrooms or humid areas (following the installation safety standards currently in effect in your own country). All the motors are available in the 230V - 50
Hz configuration and are protected against overheating by a non-automatic resetting safety device. Other ratings available upon request. Each product complies with safety standards EN 603352 - 80 and electromagnetic compatibility standards EN 55014, EN 61000-3-2/3, EN 55104 which are valid in the EEC.
ASW WINDOW MOUNTED EXHAUST
The ASW series includes 3 axial exhaust fan model, with an air delivery rate of 85 up to 230 m°/h.
ASW models are very compact, easy to install and therefore particularly recommended for small rooms where a window or glass installation is required. The appliance can be installed on glass with a thickness up to 30 mm.
​
All models are equipped with a back draught gravity shutter, to prevent cold air from returning from outdoors, a protective silicon gasket, and a bright LED indicator that even from distance clearly shows that the unit is working.
Each version is in double electrical insulation and protected against vertical rain.
ASM100PLUS
WALL MOUNTED EXHAUST FAN WITH AUTOMATIC SHUTTER FOR 100MM DUCTS
​
All models are in double electrical insulation • and IP 44 A for water spray protection against rain.
Therefore they are particularly recommended for installation in bathrooms or humid areas (following the installation safety standards currently in effect in your own country). Motor are available in the 230V - 50 Hz configuration and is protected against overheating by a non-automatic resetting safety device.
The product complies with safety standards EN 603352 - 80 and electromagnetic compatibility standards EN
55014, EN 61000, EN 55104 which are valid in the EEC.
